Samsung Galaxy S6 Edge G925L Gets Android 6.0.1 Marshmallow Update via CRISSCROSS Custom ROM: How to Install

By Staff Writer | Mar 07, 2016 05:58 AM EST

Samsung Galaxy S6 Edge phones can now proceed to Android 6.0.1 Marshmallow using the CRISSCROSS ROM. The custom ROM brings in a lot of surprises in tweaks and features that include Aroma Installer, Samsung theme engine and more.

CRISSCROSS is a deodexed custom ROM based on Android 6.0.1 Marshmallow that will offer Samsung Galaxy S6 Edge with model number G925L pre-root, five-way reboot and call recorder. It is considerably fast and stable.

Take note of the following reminders and prerequisites before installing CRISSCROSS on the phone:

1.      Use only Samsung Galaxy S6 Edge with model number G925L. Using other variant may cause severe damage to phone.

2.      Install TWRP Recovery here.

3.      Back up all necessary data here.

4.      Download a USB driver here.

5.      Installing the any custom ROM induces risk of damaging device. Neither this site nor developers of the CRISSCROSS will be held responsible for such damage.

Here is a detailed guide to download and install Android 6.0.1 CRISSCROSS to Samsung Galaxy S6 G925SL:

1.      Download Android 6.0.1 CRISSCROSS ROM here on PC.

2.      Connect phone to PC using the USB cable.

3.      Copy then paste downloaded ROM to phone's memory or SD card.

4.      Switch off phone and plug it out from the PC.

5.      Go to Recovery Mode by press holding volume up, home and power buttons.

6.      Choose 'Wipe' to delete of data and 'Swipe to Factory Reset'.

7.      Go to main menu and choose 'Install'. Choose the copied ZIP file on the phone.

8.      Choose 'Swipe to Confirm Flash'.

9.      Wait for the installation to complete.

10.  When phone gets into any boot loops or other troubles, tap 'Wipe cache/dalvik' button.

11.  Choose 'Reboot System'.

Check software version now on Settings > About phone.

More Sections